HAGZ SPRING CLIP DETAILS

12 Clips per bag.

• StabilizesBody Grip Traps… Designed for160’s and smaller(XL version fits 220’s-330’s)
• ALWAYS ATTACHEDto your trap
• Works on3/8″ rods(fiberglass or steel)
• Can also be usedwith the HAGz Bracketfor Extreme Versatility(stabilize on rocks, logs, etc)
• Weighs .52 Oz/each
• Patent Pending
• Made in USA

HAGZ SPRING CLIP BENEFITS

• AlwaysATTACHEDto your TRAP! Never lose or forget it
• Allows you to orient trigger wires in any position you want, not where thedeviceallows(top, bottom, left, right)
• Unleashes new setting opportunities.
• Fast and Efficient; No need to find the ‘perfect’ stick that the spring eye will fit over
• Small and non-intrusive, weighs .52ounces and doesn’t restrict the use of the spring eye
• Great for those that pack in and are limited on pack basket space!

HOW IT WORKS

1. Insert The HAGz Spring Clip between the rungs in the spring coils
2. To use as an Adjustable Set:
   1. PositionTrap
      1. Set Body Grip Trap
      2. Slide the hole in the HAGz Spring Clip over a 3/8″ rod
      3. Release to allow the HAGz Spring Clip to lock on the rod when at the desired height
3. Optionally: Forextreme versatilityor to use so itfalls-away- (Requires HAGz Bracket)
   1. Mount HAGz Bracket to virtually any object (stick, log, rock, bridge wall, etc)
   2. Set Body Grip Trap
   3. Insert the HAGz SpringClip into either ofthe large slots inthe HAGz Bracket
   4. Wire/ Cable off trap as desired as it will release from the HAGz Bracket when a catch is made
4. Orient Trigger Wires: (up, down, left or right)
   1. Rotate the trap to orient triggers wires as desired
   2. Flipping the HAGz Spring Clip over on the rod allows for 2 other trigger positions

HAGZ SPRING CLIP INSTRUCTIONS

1. Installing Clip:
   1. Usinga wide, flat head screwdriver, open one of the rungs in the spring by ‘wedging’ it in and ‘turning’ it -(the wider the screwdriver the better)
   2. Insert the Clips flat side between the spring coils -Inserting from the center of the spring eye and through the spring coil
   3. Remove the screw driver
   4. Open the next spring rung
   5. Using pliers, get a bite on the back of the clip and the outer edge of the spring and squeeze the clipthrough the spring
2. Stabilizing Trap
   1. To use as an Adjustable Set:
      1. Set Body Grip Trap
      2. Slide the hole in the HAGz Spring Clip over a 3/8″ rod
      3. Release to allow the HAGz Spring Clip to lock on the rod when at the desired height
   2. Optionally: For extreme versatility or to use so it falls-away -(RequiresHAGzBracket)
      1. Mount HAGz Bracket to virtually any object (stick, log, rock, bridge wall, etc)
      2. Set Body Grip Trap
      3. Insert the HAGz SpringClip into either ofthe large slots inthe HAGz Bracket
      4. Wire/ Cable off trap as desired as it will release from the HAGz Bracket when a catch is made
3. Orient Trigger Wires: (up, down, left or right)
   1. Rotate the trap to orient triggers wires as desired
   2. Flipping the HAGz Spring Clip over on the rod allows for 2 other trigger positions

TIP: *Installing clips in the same orientation, same spring side, etc makes it easier to understand trigger orientation based on how you run the clip on the rod